Page Comparison

Updated 2021_07_26: 

• VGA wall plate has a light indicating status.
  • Amber = not connected
  • Green = connected
• Audio connection on VGA wall plate requires VGA to be connected to work. 

...

Summary:

This wiki is to help you set up audio in the Munk Conference room for special events.

Step-by-step guide

1. Go to main interface panel (side of chalk board), push Power Button (top button). 
2. The select either HDMI (middle button) or VGA (bottom button). 
   
   Image Added
   
   
3. If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable. 
   
   Image Added
   
   
4. If using VGA, the separate audio connection requires the VGA connection to be connected too.
   (On the wall side of the VGA cable there's a status light, where Amber = audio not connected, Green = audio connected)
   
   Image Added
   
   
   1. Plug VGA connection into device.
   2. Plug 3.5mm audio connection into device.
5. Audio volume is controlled by the volume controls on the computer. 

1. First, check out the Projector Key from the Human Resource Office. You will need this key to open up audio controls.

...