Page Comparison

...

Connecting to Projector via HDMI

1. Go to the main interface panel (side of chalk board), push Power Button (top button). 
2. The source will automatically set itself once you plug the HDMI/USB-C cable into your device. 
3. Once connected via HDMI or wirelessly, you can control the room's audio with the audio controller.
   
   
   
   
4. If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable. 
   
   
5. When done presenting, please power off the projector by double pressing the power button at the top of the button panel to preserve the life of the projector bulb. 

...

1. Power on the projector. 
2. Navigate to https://av-igppmunk-am.ucsd.edu to take you to the AirMedia homepage. 
   
3. Click Mac in the grey box to download the software. 
                       
4. Click Allow to start the download. 
   
5. In your Download folder, open up AirMedia file.  
   
6. Select Open this file.
   
7. In the Crestron AirMedia app, enter the hostname of the projector if it does not automatically populate at launch: av-igppmunk-am.ucsd.edu
   
   
8. Enter the 4 digit code that pops up on the projector screen. 
   
9. Click on the AirPlay icon located on the toolbar of your Mac and select "Display Preferences".
10. Click on the "Add Display" dropdown and select the "av-munk303-am' display.
    
11. Enter the 4 digit code once more to display your desktop onto the projector screen. 
12. You should now be connected to the projector. 
13. To disconnect, navigate back to Display Preferences, and in the "add display" dropdown, click on the grayed-out area on that list to disconnect from the projector. 

Presenting in the Revelle Conference Room 

...