Page Comparison

Summary:

This page explains how to set up audio in the Munk Conference room for special events.

For instructions on how to present in the Revelle Conference room in the 4000 building, View the link here for instructions. 

Step-by-step guide

1. Go to main interface panel (side of chalk board), push Power Button (top button). 
2. The select either HDMI (middle button) or VGA (bottom button). 
   
   
   
   
3. If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable. 
   
   
   
   
4. If using VGA, the separate 3.5mm audio connection requires the VGA connection to be connected too.
   (On the wall side of the VGA cable there's a status light, where Amber = audio not connected, Green = audio connected)
   
   
   
   
   1. Plug VGA connection into device.
   2. Plug 3.5mm audio connection into device.
5. Audio volume is controlled by the volume control on the device. 

...