Page Comparison

Summary:

This page explains how to set up audio in the Munk and Revelle Conference rooms for special events.

...

1. Power on the projector. 
2. Navigate to https://av-igppmunk-am.ucsd.edu to take you to the AirMedia homepage. 
   
3. Click Mac in the grey box to download the software. 
                       
4. Click Allow to start the download. 
   
5. In your Download folder, open up AirMedia file.  
   
6. Select Open this file.
   
7. In the Crestron AirMedia app, enter the hostname of the projector if it does not automatically populate at launch: av-igppmunk-am.ucsd.edu or you can used the IP address 172.19.40.96
   
   
8. Enter the 4 digit code that pops up on the projector screen. 
   
9. Click on the AirPlay icon located on the toolbar of your Mac and select "Display Preferences".
10. Click on the "Add Display" dropdown and select the "av-munk303-am' display.
    
11. Enter the 4 digit code once more to display your desktop onto the projector screen. 
12. You should now be connected to the projector. 
13. To disconnect, navigate back to Display Preferences, and in the "add display" dropdown, click on the grayed-out area on that list to disconnect from the projector. 

...

1. Push the button under Wireless Video on the wall-mounted control panel. 
   
2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip the middle switch to the DOWN position to lower the screen and return the switch to the MIDDLE position once the screen is completely down.
   
3. Visit this website: http://av-igpp4301-am.ucsd.edu-, which should also be visible on the screen.
   (You need to be connected to UCSD-Protected when connecting to this device)
4. If you encounter a message similar to the following (depending on the browser), click on Show Details and visit this website.
   
   
5. Click Start Presenting. 
   
6. Click Mac in the grey box to download the software. 
                       
7. Click Allow to start the download. 
   
8. In your Download folder, open up AirMedia file.  
   
9. Select open this file.
   
10. Once the Crestron AirMedia app is open, type "av-igpp4301-am.ucsd.edu" into the search bar shown below and hit enter. 
    
    
     
11. When prompted, enter the 4 digit code found on the screen under the web address (URL) on the projector desktop.
    
12. Once you've entered the 4-digit code, follow the screen mirroring instructions from the Crestron app. 
    (If you do not see the AirPlay tab on your menu bar, navigate to System Preferences > Displays > select the "Add Display" dropdown and select "av0igpp4301-am").
    
13. You should now see your display via the projector.
14. When done using screen sharing disconnect from airplay via task bar in top right corner, select turn off Air Play
    

...

1. Image Modified

...

...

1. When done with done with screen, please power down system by pushing the button

...

1. under Power Off. 
   Image Modified

...

...

1. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.
   Image Modified

...

1. To disconnect from air play just go taskbar and click on the arrow to

...

1. disconnect    
   
   

...