Summary:
This page explains how to set up audio in the Munk and Revelle Conference rooms for special events.
...
- Go to the main interface panel (side of chalk board), push Power Button (top button).
- The source will automatically set itself once you plug the HDMI/USB-C cable into your device.
- Once connected via HDMI or wirelessly, you can control the room's audio with the audio controller.
- If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable.
- When done presenting, please power off the projector by double pressing the power button at the top of the button panel to preserve the life of the projector bulb.
...
- Power on the projector.
- Navigate to https://av-igppmunk-am.ucsd.edu to take you to the AirMedia homepage.
- Click Mac in the grey box to download the software.
- Click Allow to start the download.
- In your Download folder, open up AirMedia file.
- Select Open this file.
- In the Crestron AirMedia app, enter the hostname of the projector if it does not automatically populate at launch: av-igppmunk-am.ucsd.edu or you can used the IP address 172.19.40.96
- Enter the 4 digit code that pops up on the projector screen.
- Click on the AirPlay icon located on the toolbar of your Mac and select "Display Preferences".
- Click on the "Add Display" dropdown and select the "av-munk303-am' display.
- Enter the 4 digit code once more to display your desktop onto the projector screen.
- You should now be connected to the projector.
- To disconnect, navigate back to Display Preferences, and in the "add display" dropdown, click on the grayed-out area on that list to disconnect from the projector.
...