Versions Compared

Version Old Version 20 New Version 21
Changes made by

Preston Pierce

Preston Pierce

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Summary:

This page explains how to set up audio in the Munk and Revelle Conference rooms for special events.

Table of Contents

Presenting in the Munk Conference Room 

  1. Go to main interface panel (side of chalk board), push Power Button (top button). 
  2. The source will automatically set itself once you plug the HDMI/USB-C cable into your device. 
  3. Once connected via HDMI or wirelessly, you can control the room's audio with the audio controller.



  4. If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable. 

  5. When done presenting, please power off the projector by double pressing the power button at the top of the button panel to preserve the life of the projector bulb. 

Presenting in the Revelle Conference Room 

Connecting Wirelessly:

  1. Push the button under Wireless Video on the wall-mounted control panel. 
  2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip the middle switch to the DOWN position to lower the screen and return the switch to the MIDDLE position once the screen is completely down.
  3. Visit this website: http://av-igpp4301-am.ucsd.edu-, which should also be visible on the screen.
    (You need to be connected to UCSD-Protected when connecting to this device)
  4. If you encounter a message similar to the following (depending on the browser), click on Show Details and visit this website.

  5. Click Start Presenting. 
  6. Click Mac in the grey box to download the software. 
                        
  7. Click Allow to start the download. 
  8. In your Download folder, open up AirMedia file.  
  9. Select open this file.
  10. Once the Crestron AirMedia app is open, type "av-igpp4301-am.ucsd.edu" into the search bar shown below and hit enter. 


     
  11. When prompted, enter the 4 digit code found on the screen under the web address (URL) on the projector desktop.
  12. Once you've entered the 4-digit code, follow the screen mirroring instructions from the Crestron app. 
    (If you do not see the AirPlay tab on your menu bar, navigate to System Preferences > Displays > select the "Add Display" dropdown and select "av0igpp4301-am").
  13. You should now see your display via the projector.
  14. When done using screen sharing disconnect from airplay via task bar in top right corner, select turn off Air Play

...

Anchor
Connecting to Project with HDMI / VGA
Connecting to Project with HDMI / VGA


Connecting to Projector with HDMI / VGA:  

  1. Select HDMI or VGA on the wall-mounted panel. 
  2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip middle switch to DOWN position to lower the screen and return switch to MIDDLE position once screen is completely down.
  3. Choose the VGA or HDMI cord from the cords located below the chalk board.
    HDMI: 

    or VGA:
  4. Depending on your device, Using the HDMI or VGA connection may require a dongle. Use one of the attached dongles or come see us downstairs in 4112.
    USB-C to HDMI: 

    USB-C to VGA:
  5. When done with the screen, please power down system by pushing the button under Power Off. 
  6. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.

Functionality of Projector

The projector has a 90-second shutoff when a source is not detected. The projector will display a "power save" message 60 seconds before it goes into standby and the green power light will turn amber along with the bulb turning off. 

...