Page Comparison

Summary:

This page explains how to present using the projectors in the Munk and Revelle Conference rooms for special events.

...

1. Power on the projector. 
2. Navigate to https://av-igppmunk-am.ucsd.edu to take you to the AirMedia homepage. 
   
3. Click Mac in the grey box to download the software. 
                       
4. Click Allow to start the download. 
   
5. In your Download folder, open up AirMedia file.  
   
6. Select Open this file.
   
7. In the Crestron AirMedia app, enter the hostname of the projector if it does not automatically populate at launch: av-igppmunk-am.ucsd.edu or you can used the IP address 172.19.40.96
   
   
8. Enter the 4 digit code that pops up on the projector screen. 
   
9. Click on the AirPlay icon located on the toolbar of your Mac and select "Display Preferences".
10. Click on the "Add Display" dropdown and select the "av-munk303-am' display.
    
11. Enter the 4 digit code once more to display your desktop onto the projector screen. 
12. You should now be connected to the projector. 
13. To disconnect, navigate back to Display Preferences, and in the "add display" dropdown, click on the grayed-out area on that list to disconnect from the projector. 

Troubleshooting the Munk Projector

1. If you are connecting to the Munk Projector via HDMI and your desktop is not showing on the projector, look behind the chalkboard and make sure that the controller is set to "auto" to autodetect the HDMI or VGA signal.
   Image Added

For macOS Ventura Airplay

...

Connecting to Display via AppleTV

1. Power on AppleTV and Display with AppleTV remote control
   Image Modified

2. Click Control Center Image Modified in the menu bar, click the Screen Mirroring icon Image Modified, then choose igpp-munk5-atv.

3. Enter the 4-digit code on your Mac
4. To set whether your desktop mirrors or extends your Mac screen, click the Screen Mirroring icon Image Modified, then choose Mirror Built-in Display or Use As Separate Display.

Connecting to Display via HDMI

1. The source will automatically set itself once you plug the HDMI/USB-C cable into your device

...