Updated 2021_07_26:
- VGA wall plate has a light indicating status.
- Amber = not connected
- Green = connected
- Audio connection on VGA wall plate requires VGA to be connected to work.
This wiki is to help you set up audio in the Munk Conference room for special events.
1. First, check out the Projector Key from the Human Resource Office. You will need this key to open up audio controls.
2. Go to the Munk Conference room. Head into the ocean side of the room where the VGA and audio cables are located.
3. Find the audio cable; there should be two 3.5mm jacks located at both ends of the cable. The headphone jack should look like this:
4. Plug one 3.5mm jack into the wall input where it says "AUDIO": 
5. Plug the other jack into your audio source (computer, iPod, anything with a 3.5mm jack).
6. With the Project Key, go into the Munk Coffee Room and unlock the cabinet. You should see a stack of media equipment that look like this: 
7. To power on the audio system, press the power button on the Precedence CMA30. There should be an opening to push the power button on.
8. Audio levels should be set and sounds should come out of the speakers. You can decrease audio volume on your device (computer, iPod, etc).
If you need help, contact the Front Office at 858.534.1927