To start you will need an UCSD Active Directory (AD) account that is activated for Code42.  If you are not installing with method 1 below, please submit an account request for an account.

Note: You may set up Code42 with your account for up to 4 client devices.  Full service level agreement can be found at backup SLA*

Table of Contents
indent 20px

Installation

For Windows and Linux

• • Follow the instructions from Code42 Crashplan https://support.code42.com/CP/App/Get_started/Install_the_Code42_app#Windows 
  • Installers can be downloaded from https://console.us2.crashplan.com/app/#/console/app-downloads. Be sure to select the latest installer for your operating system and processor.
  • Use clients.us2.crashplan.com for the server address

For MacOS:

• • If you have a laptop be sure the power cable is plugged-in to allow the backup process to run.  
  • If you have FileVault2 full disk encryption enabled make sure you have login to decrypt your disk after a reboot to permit the backup of your disk and that screen locks are set to automatic to secure your session.  
  • Sparsebundle images and sparseimages files are not supported and known to not be recoverable with Code42 https://support.code42.com/CP/Admin/Planning_and_installing/Code42_console_settings#Global_exclusions
  • If you have any other previous version of Code42 installed, Uninstall any older version first.

Method 1: Installing via Self Service (Preferred) 

What you will need:

• • • A Mac managed by the IGPP Helpdesk (not self-managed)
    • Internet connection

Installation steps:

1. 1. 1. 1. Navigate to your Applications folder.
         2. Launch Self Service.
         3. Click "All" on the right sidebar.
            
         4. Locate Install Code42 Cloud and click Install to start the installation process.

         5. Grant Code42 Full Disk Access in System Preferences 
            Select Security & Privacy > Unlock to make changes > Select full disk access on left pane > select Code42  

         6. Once completed, open Code42 in your Applications folder
         7. Enter your UCSD Email address, this will open a browser window that will request your Active Directory credentials and 2-factor authentication.

Method 2: Installing via SMB download

What you will need:

UCSD network connection (Ethernet, UCSD Wireless, or VPN) to download the installer

1. 1. 1. 1. Unsure how to connecting to SMB (Mac or PC) click here for help.
         2. In the Finder menu bar, navigate to Go > Connect to Server.
         3. Enter "smb://igppsoftware.ucsd.edu/guest/Code42" for the Server Address and click Connect.
            **NOTE** If using an M1 Mac, use the installer with "arm64" in the installer name.  For Intel Mac, use the installer with "x86-64" in the installer name. 
         4. Select desired OS folder
         5. Follow the installation steps below.

Installation Steps

1. 1. 1. 1. Double-click on the Code42_x.x.x_Mac-xxxxx.dmg file to mount the DMG image.
         2. Open the mounted image
            
         3.  Click Install Code42 and go through the installation process.

Code42 Setup

Grant Code42 Full Disk Access in System Preferences 

...

This will take you to the main window. The application will sync your files with both of our backup servers (this may take a while depending on how much data you have and your unload speed). This process will run in the background and then the backup will begin. 

Verification

Check client backup status on server

With your email address log in to https://console.us2.crashplan.com/

Verify a file is selected for backup

You can verify that a file is set to be backed up by doing the following:

Open the Code42 application (/Applications/Code42)

...

Also Note: By default, the checkmark does not necessarily indicate that the entire contents of a folder are selected.

Verify files are being backed up

A green checkmark located next to the PROe Cloud server indicates that your backup is complete. (NOTE : The initial backup typically takes 2-5 days to complete depending on the amount of data being backed up).  You may want to do a simple test restore to confirm.

Code42 server status

Visit https://status.code42.com/#

Uninstalling Code42

To fully uninstall Code42 using Command line, Run the following command 

sudo /Applications/Code42.app/Contents/Helpers/Uninstall.app/Contents/Resources/uninstall.sh

If you need further assistance, please contact IGPP HelpDesk.

...