Page Comparison

...

This page explains how to set up audio in the Munk and Revelle Conference room rooms for special events.For instructions on how to present

Presenting in the

...

Munk Conference Room 

1. Go to main interface panel (side of chalk board), push Power Button (top button). 
2. The source will automatically set itself once you plug the HDMI/USB-C cable into your device. 
3. Once connected via HDMI or wirelessly, you can control the room's audio with the audio controller.
   
   
   
   
4. If using HDMI the audio will automatically pass from the computer to the speakers within the HDMI cable. 
   
   
5. When done presenting, please power off the projector by double pressing the power button at the top of the button panel to preserve the life of the projector bulb. 

Presenting in the Revelle Conference Room 

Connecting Wirelessly:

1. Push the button under Wireless Video on the wall-mounted control panel. 
   Image Added
2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip the middle switch to the DOWN position to lower the screen and return the switch to the MIDDLE position once the screen is completely down.
   Image Added
3. Visit this website: http://av-igpp4301-am.ucsd.edu-, which should also be visible on the screen.
   (You need to be connected to UCSD-Protected when connecting to this device)
4. If you encounter a message similar to the following (depending on the browser), click on Show Details and visit this website.
   
   
5. Click Start Presenting. 
   Image Added
6. Click Mac in the grey box to download the software. 
   Image Added                    
7. Click Allow to start the download. 
   Image Added
8. In your Download folder, open up AirMedia file.  
   Image Added
9. Select open this file.
   Image Added
10. Once the Crestron AirMedia app is open, type "av-igpp4301-am.ucsd.edu" into the search bar shown below and hit enter. 
    
    Image Added
     
11. When prompted, enter the 4 digit code found on the screen under the web address (URL) on the projector desktop.
    Image Added
12. Once you've entered the 4-digit code, follow the screen mirroring instructions from the Crestron app. 
    (If you do not see the AirPlay tab on your menu bar, navigate to System Preferences > Displays > select the "Add Display" dropdown and select "av0igpp4301-am").
    Image Added
13. You should now see your display via the projector.
14. When done using screen sharing disconnect from airplay via task bar in top right corner, select turn off Air Play

          Image Added 

14. When done with done with screen, please power down system by pushing the button under Power Off. 
Image Added 

15. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.
Image Added

16. To disconnect from air play just go taskbar and click on the arrow to disconnect

Connecting to Projector with HDMI / VGA:  

1. Select HDMI or VGA on the wall-mounted panel. 
   Image Added
2. Behind the wall-mounted control panel is a screen control panel with 3 switches. Flip middle switch to DOWN position to lower the screen and return switch to MIDDLE position once screen is completely down.
   Image Added
3. Choose the VGA or HDMI cord from the cords located below the chalk board.
   HDMI: 
   Image Added
   or VGA:
   Image Added
4. Depending on your device, Using the HDMI or VGA connection may require a dongle. Use one of the attached dongles or come see us downstairs in 4112.
   USB-C to HDMI: 
   Image Added
   USB-C to VGA:
   Image Added
5. When done with the screen, please power down system by pushing the button under Power Off. 
   Image Added
6. Return to the screen control panel. Flip middle switch to UP position to raise the screen and return switch to MIDDLE position once screen is completely back up.
   Image Added

Functionality of Projector

The projector has a 90-second shutoff when a source is not detected. The projector will display a "power save" message 60 seconds before it goes into standby and the green power light will turn amber along with the bulb turning off. 

Image Added

Image Added

 Based on source selection:

- Mac Mini; based on sleep mode setting of the mac, Crestron will lose signal and the projector will shut down ~3:30 min after the Mac goes to sleeps

- Laptop inputs; if selected and no device is connected or disconnected at the end the projector will be off roughly after 3:30 min.

- AirMedia; since the video is always present if selected, a timer for 10 mins for swapping inputs if no user is presenting. The projector will start its default 2 min shutdown.

 The option for shutdown on the projector is light source only.

 If a user is to wake up their laptop or wake up the Mac mini if sleeping, the projector will turn on again without needing to press the panel.

If you need help, contact the Front Office at (858) 534-1927.

...